Our new washers with built-in Schneider PLC panel with the following functions:
• working hour counter
• elevator controls – speed and grinder
• brush controlsbelt controls – speed and direction
• error log
• notifications for the operator about maintenance according to the working hours
3000 kg/h
WNr. 1.4301, stainless steel
IP65
The fruits get via the input hopper to the soaking stage. The elevator towards the fruits under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both directions. Machine mounted on 2ea. swivel, 2ea. lockable wheels or on adjustable Anti-vibration feet. Minimal maintenance is required.
Specifications:
• Performance: 3000 kg/h
• Electric demands: 0,75 kW, 400 V, 16 A, triphase
• Material: WNr. 1.4301, AISI 304 stainless steel
• Dimensions: 710x2810x2120 mm
• Output height: 1820 mm
• Weight: 135 kg
• Tub water capacity: 280 L/shift
• Washing water supply: (20-100L/h depends on the setting)
• Water connection: 3/4 inch quick coupling
• IP65 certified electronics
Available options:
– Air-blow module – built-in air nozzles in the tub area powered by a turbo-fan for the intense washing or sinking fruits
– Air-knife module – the air-knife removes the water droplets on the surface of the fruits, thus reducing the amount of water reaching the end product.
– Circulating water pump with raw filter
1000-2000 kg/h
WNr. 1.4301, stainless steel
Washing + grinding
The fruits get via the input hopper to the soaking stage. From there the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both directions. Mounted on 2ea. swivel, 2ea. lockable wheels or on adjustable Anti-vibration feet. Requires minimal maintenance.
Specifications:
• Performance: 1000-2000 kg/h
• Electric demands: 3 kW, 400 V, 16 A, triphase
• Material: WNr. 1.4301, AISI 304 stainless steel
• Dimensions: 710x3200x2120 mm
• Output height: 1270 mm
• Weight: 205 kg
• Tub water capacity: 280 L/shift
• Washing water supply: (20-100L/h depending on the setting)
• Water connection: 3/4“ quick connector
• IP65 certified electronics
• Grinder with a massive crushing hammer (also suitable for beetroot and quince)
• Noise emission: 60-70 dB
Available options:
– Changeable diameter sieve: for changing the texture of the mash
– Stop ‘n’ Go system: membrane sensor, which synchronizes the fruit washer/grinder and the belt press to work together
– Adaptive freshwater spray – fresh water spray nozzles are active only when the elevator is going
– Air-blow module – built-in air nozzles in the tub area powered by a turbo-fan for the intense washing or sinking fruits – Air-knife module – the air-knife removes the water droplets on the surface of the fruits, thus reducing the amount of water reaching the end product.
– Circulating water pump with raw filter
1500-2000 kg/h
WNr. 1.4301, stainless steel
Washing with brushes + grinding
The fruits get via the input hopper through the brushes to the soaking stage. From there elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways. Mounted on 2ea. swivel, 2ea. lockable wheels or on adjustable Anti-vibration feet. Requires minimal maintenance.
Specifications:
• Performance: 1500-2000 kg/h
• Electric demands: 4 kW, 400 V, 16 A, triphase
• Material: WNr. 1.4301, AISI 304 stainless steel
• Dimensions: 3370x1100x2220 mm
• Output height: 1380 mm
• Weight: 290 kg
• Tub water capacity: 280 L/shift
• Washing water supply: (100-200 L/h depending on the setting)
• Water connection: 3/4“ quick connector
• IP65 certified electronics
• Grinder with a massive crushing hammer (also suitable for beetroot and quince)
• The grinder can be bypassed by a slide so this way the machine is used for processing stone fruits.
• Noise emission: 60-70 dB
• 4 pcs of strong, counter-rotating brushes for the intense cleaning
Available options:
– Changeable diameter sieve: for changing the texture of the mash
– Stop ‘n’ Go system: membrane sensor, which synchronizes the fruit washer/grinder and the belt press to work together
– Adaptive freshwater spray – fresh water spray nozzles are active only when the elevator is going
– Air-blow module – built-in air nozzles in the tub area powered by a turbo-fan for the intense washing or sinking fruits – Air-knife module – the air-knife removes the water droplets on the surface of the fruits, thus reducing the amount of water reaching the end product.
– Circulating water pump with raw filter
MDK 3000
Fruit Washer with Brushes and Grinder
3000 kg/h
WNr. 1.4301, stainless steel
Washing with brushes + grinding
The fruits get via the input hopper through the brushes to the soaking stage. From there the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both directions. Mounted on 2ea. swivel, 2ea. lockable wheels or on adjustable Anti-vibration feet. Requires minimal maintenance.
Specifications:
• Performance: 3000 kg/h
• Electric demands: 5 kW, 400 V, 16 A, triphase
• Material: WNr. 1.4301, AISI 304 stainless steel
• Dimensions: 950x3660x2120mm
• Output height: 1270 mm
• Weight: 360 kg
• Tub water capacity: 440 L/shift
• Washing water supply: (100-200L/h depending on the setting)
• Water connection: 3/4“ quick connector
• IP65 certified electronics
• Grinder with a massive crushing hammer (available for beetroot and quince)
• The grinder can be bypassed by swinging to the side so in this case the machine is used to process stone fruits.
• Noise emission: 60-70 dB
• 4 pcs of strong, counter-rotating brushes for the intense cleaning
• Rotating paddle, that pushes the fruits towards the elevator
Available options:
– Changeable diameter sieve: for changing the texture of the mash
– Stop ‘n’ Go system: membrane sensor, which synchronizes the fruit washer/grinder and the belt press to work together
– Adaptive freshwater spray – fresh water spray nozzles are active only when the elevator is going
– Air-blow module – built-in air nozzles in the tub area powered by a turbo-fan for the intense washing or sinking fruits – Air-knife module – the air-knife removes the water droplets on the surface of the fruits, thus reducing the amount of water reaching the end product.
– Circulating water pump with raw filter
MDK 4000
Industrial Fruit Washer with Brushes and Grinder
4000 kg/h
WNr. 1.4301, stainless steel
Washing with brushes + grinding
The MDK 4000 is an industrial fruit and vegetable washing machine, equipped with soft washing brushes for gentle cleaning, blower system to generate, effect, further intensive cleaning. With the help of the conveyor belt, the fruit is passed under the fresh water shower to the grinder, where the fruit or vegetable is further processed to the desired fineness.
Specifications:
• Rated capacity: 4000 kg/h
• Power requirement: 6 kW, 400V, 16A
• Operation: Touch-screen operation
• Material: 1. 4301 stainless steel
• Water connection: ¾” quick coupling
• Belt speed infinitely variable
• Noise emission: 60-70 dB
• Easy to clean
• Water requirement: 100-200 L/h (depending on the settings)
• Dimensions: (LxWxH): 3820x1400x2200 mm
• Mash discharge height: 1300 mm
Available options:
• Changeable diameter sieve: for changing the texture of the mash
• Stop ‘n’ Go system: membrane sensor, that allows the fruit washer/grinder and the belt press work together
• Dosing module: sliding door with end-switch, that allows the dosing from the grinder safely to the pack press.























